How to Get an Oversize Load Permit

Oversize loads must have a permit to travel to an origin or destination in the City of Santa Monica. Oversize loads must travel on the City’s truck route network to the extent possible. Valid insurance is required.

Please allow 1-3 business days for processing.

Jump to Section:
Continue the Process:

  1. Determine if an Oversize Load Permit is required.

    + -

    A permit is needed if:

    • The total outside width of any vehicle or its load exceeds 8 feet 6 inches (102”), or
    • The height of any vehicle or its load exceeds 14 feet, or
    • The length of any single vehicle or its load exceeds 40 feet, except as specified in CVC 35400(b) or the length of a combination vehicle or its load exceeds 65 feet, or
    • The maximum gross weight is over 80,000 pounds, the single axle weight is over 20,000 pounds, or the tandem axle weight is over 34,000 pounds.

  2. Start Oversize Load Permit Application on CityGrows

    + -

    Visit the CityGrows website to complete your application.  Start by selecting your application type:

    • Determine the haul route

      + -

      Using the city’s Truck Route Map determine the most direct route that follows the City Truck Route to the extent possible. City staff are available to aid in route selection.

    • Complete Application and Upload Certificate of Insurance

      + -

      Complete the form fill application.  Upload a Certificate of Insurance that complies with the City of Santa Monica requirements. Make payment using credit card.

    • Print the permit so it is available for display.

      + -

      The driver of the oversize load must have a copy of the permit available for inspection during the haul.

    Contact Us: